Payment & Shipping Terms:
|Advantage:||Automatic Welding||Material:||Carbon Steel, Alloy Steel|
|Condition:||New||Color:||Yellow, Blue, Customized|
|Usage:||Weld Hydraulic Cylinder Flange||Industries:||Cement, Steel, Mining, Power, Security, Agriculture, Recycling|
|Voltage:||220V/380V/400V, 220V/380V/415V/440V/customized, 220V50HZ1P, Optional, 380V Or 220V/60HZ /3P (Also According To Your Local Voltage)||Machine Type:||Hydraulic Cylinder Flange Automatic Welding Machine|
3000mm Pipe Welding Machine,
0.6MPa Pipe Welding equipment,
500A Automatic Welding Machine
Multifunction Automatic Pipe Welding Machine
Automatic standard pipe welding station consists of welding manipulator, elbow welding machine, self centering welding positioner and pipe supporting device. It is able to realize automatic pipe welding with root pass, fill and cap pass realized in the same one machine, no need to change to another station, reduce the handling works, and maximazed the efficiency.
Instruction of Equipment
1. Workpiece Loading & Unloading Method: Manual
2. Locating Method of The Workpiece: Self-centering chuck in the left clamp the workpiece to locate the center of rotation by manual.
Two supporting racks locate the center of the workpiece and rotate together with the workpiece coaxially. Pneumatic tailstock is equipped in the right end, the centre of the tailstock sustain the workpiece gyration.
3. Methods For Welding: Single torch gas shielded arc welding, automatic single-layer welding or multi-layer welding can be achieved once. Single-layer & single-pass welding, multi-layer & single-pass welding, multi-layer & multi-pass welding can be achieved full automatically.
4. The one end of the workpiece must be clamped and another end has an inner bore. The outer diameter can be supported by the contact rollers to locate the centre of the workpiece. (can weld workpiece while only the chuck clamp it directly or the chuck clamp it and the tailstock press it or the chuck clamp it and the contact rollers support it)
Main Technical Parameters
|Rated Load Capacity||2T|
|Workpiece Length Range||≤3000mm|
|Workpiece Diameter Range||φ50-φ500mm|
|Rotating Speed of The Main Spindle||0.19-2.2r/min|
|Elevating Stroke of The Torch||300mm|
|Manual Adjusting Range of The Torch||X:≥50mm Y:≥50mm|
|Turnover Angle of The Workpiece||360°|
|Pressure of The Compressed Air||0.3～0.6MPa|
|Rated Welding Current||500A|
|Welding Centre Height||950mm|