|
Product Details:
Payment & Shipping Terms:
|
| Machine Type: | Hydraulic Cylinder Automatic Welding Machie | Condition: | New |
|---|---|---|---|
| Material: | Carbon Steel, Alloy Steel | After-Sales Service: | Engineers Available To Service Machinery Overseas, Field Installation, Commissioning And Training, Video Technical Support, Field Maintenance And Repair Service |
| Warranty: | 1 Year | Color: | Yellow, Blue, Customized |
| Voltage: | 220V/380V/400V, 220V/380V/415V/440V/customized, 220V50HZ1P, Optional, 380V Or 220V/60HZ /3P (Also According To Your Local Voltage) | Usage: | Weld Hydraulic Cylinder Flange |
| Industries: | Cement, Steel, Mining, Power, Security, Agriculture, Recycling | Advantage: | Automatic Welding |
| High Light: | 3T Pipe Welding Machine,3000mm Pipe Welding System,0.3MPa Pipe Cladding Machine |
||
Automation Welding System for Hydraulic Cylinder, Hydraulic Cylinder Flange Automatic Welding Machine
I. Machine Instruction
Workpiece Loading & Unloading Method: Manual
Locating Method of The Workpiece: Self-centering chuck in the left clamp the workpiece to locate the center of rotation by manual. Two supporting racks locate the center of the workpiece and rotate together with the workpiece coaxially. Pneumatic tailstock is equipped in the right end, the centre of the tailstock sustain the workpiece gyration.
Methods For Welding: Single torch gas shielded arc welding, automatic single-layer welding or multi-layer welding can be achieved once. Single-layer & single-pass welding, multi-layer & single-pass welding, multi-layer & multi-pass welding can be achieved full automatically.
The one end of the workpiece must be clamped and another end has an inner bore. The outer diameter can be supported by the contact rollers to locate the centre of the workpiece. (can weld workpiece while only the chuck clamp it directly or the chuck clamp it and the tailstock press it or the chuck clamp it and the contact rollers support it)
II. Main Technical Parameters
| Model Name | HF4000 |
| Rated Load Capacity | 3T |
| Workpiece Length Range | ≤3000mm |
| Workpiece Diameter Range | φ50-φ500mm |
| Rotating Speed of The Main Spindle | 0.19-2.2r/min |
| Elevating Stroke of The Torch | 300mm |
| Manual Adjusting Range of The Torch | X:≥50mm Y:≥50mm |
| Turnover Angle of The Workpiece | 360° |
| Pressure of The Compressed Air | 0.3～0.6MPa |
| Rated Welding Current | 500A |
| Welding Centre Height | 950mm |
III. Main Components List
| Discription | Manufacturer |
| PLC | Mitsubishi |
| Touch Screen | Mitsubishi |
| Electrical Element | Schneider / Siemens |
| Pneumatic Element | AirTAC, Taiwan |
| Linear Guide Rail | HIWIN, Taiwan |
| Inverter | Taian, Taiwan |
| Main Spindle Reducer | Tongli, China |
| Stepping Motor | Mitsubishi |
| Movement Reducer | Tongli, China |
| Oscillator Motor | Mitsubishi |
IV. Pictures
Tel: 0086-18106027216
